SUBMERSIBLE 3 CORE FLAT & SERVICE CABLE
Powering the world for trouble free working, this connecting cable is used for submersible pump motors. HAPIN 3 Core Flat Cable are manufactured keeping in mind the severe and difficult condition in which they are required to perform. The individual conductors are made of bright electrolytic grade copper. These wires are drawn, annealed and bunched properly to ensure flexibility and uniform resistance. Each of the 3 core copper conductors is insulated with special PVC Compound. The cores are laid up in flat parallel position. The outer sheath of the cable is made from a special grade of abrasion resistance PVC Compound impervious to water, grease, oil etc.
SELECTION GUIDE FOR 3 CORE FLAT CABLES
- HP Vs Current: the full load current for submersible pump motors, 3 phases, 50 cycles, 415-425v.
| HP AMP |
5.0 7.5 |
7.5 11.0 |
10.0 14.9 |
12.5 18.9 |
15.0 22.5 |
17.5 25.2 |
20.0 28.4 |
25.0 35.6 |
30.0 42.3 |
| HP AMP |
35.0 50.4 |
40.0 58.1 |
45.0 62.1 |
50.0 67.5 |
55.0 73.8 |
60.0 81.0 |
65.0 87.3 |
70.0 93.6 |
75.0 100.8 |
80.0 108.0 |
- Operating Factors: Multiply the current carrying capacity of the factors given below for various ambient
| Ambient Temperature C Operating Factor |
30 1.09 |
35 1.04 |
40 1.00 |
45 0.95 |
50 0.77 |
- Core Flat Cables as per IS 694:1990 with mark Size, Construction & Current Rating
| Conductor | Insulation | Sheath | Overall Dimensions | Conductor Resistance @ 20'C (max) ohms/km | Current Carrying capacity | ||
|---|---|---|---|---|---|---|---|
| No. of Cores/Area sq. mm | No./Dia of strands mm | Thickness (Nom)mm | Thickness (Nom)mm | Width (approx) 'W' mm | Height (approx) 'H' mm | ||
| 3 x 1.5 | 22/0.30 | 0.6 | 0.9 | 10.3 | 4.9 | 12.10 | 14 |
| 3 x 2.5 | 36/0.30 | 0.7 | 1.0 | 12.6 | 5.8 | 7.41 | 18 |
| 3 x 4.0 | 56/0.30 | 0.8 | 1.0 | 14.8 | 6.6 | 4.95 | 26 |
- Three core flat flexible industrial cable for submersible pump motors 1100 voltage grade
| Product Code | Number / Dia of Wire in mm | Length in mtrs./td> | Nominal Area of cond. Sq. mm |
|---|---|---|---|
| 06 209 | 22 / 0.3 | (100 mtr.) | 1.5 |
| 06 210 | 36 / 0.3 | (100 mtr.) | 2.5 |
| 06 211 | 56 / 0.3 | (100 mtr.) | 4.0 |
| 06 212 | 84 / 0.3 | (100 mtr.) | 6.0 |
| 06 213 | 140 / 0.3 (100) | (100 mtr.) | 10.0 |
| Available 100 mtrs. In Polythene pack and Available 300 & 500 mtrs. also | |||
| 06 219 | 22 / 0.3 | (500 mtr.) | 1.5 |
| 06 220 | 36 / 0.3 | (500 mtr.) | 2.5 |
| 06 221 | 56 / 0.3 | (500 mtr.) | 4.0 |
| 06 222 | 84 / 0.3 | (500 mtr.) | 6.0 |